ADTRAN DSU IV ESP, User Manual

Page: 101 / 194

Chapter 11. Configuring Unit Utilities
61204011L1-1 DSU IV ESP User Manual 11-3
Manual Command
The M
ANUAL
C
OMMAND
option is a shortcut method for entering
configuration and control commands for the DSU IV ESP. Figure
11-1 shows the menu path for the manual command. The available
manual commands are listed in Table 11-1 on page 11-4. When
using the front panel, perform the following steps to enter a
manual command:
1. From the Main menu select C
ONFIG
> L
OCAL
>U
TILITIES
.
2. Then select M
ANUAL
C
OMMAND
.
The first display prompts for command number entry:
COMMAND:00
3. Use the up arrow key to delete the current entry, then use the
number keys to enter the new value. Press
Shift
to activate
letters
A-F
.
4. Press
Enter
to complete the C
OMMAND
entry.
5. Once the command number is entered, the display shows both
the command number and the present value or setting for the
command. The command value can be edited or reissued with
the existing value.
COMMAND: XX
VALUE: 00
6. Use the number keys to enter the hexadecimal value. Press
Enter
to complete. The system briefly displays C
OMMAND
A
CCEPTED
(if the entry is valid) and returns to the active menu.