Total Access 3000 DSLAM DS3 Primary Switch Module Installation and Maintenance Practice
68
61181041L3-5A
Note: Options 4-6 are enabled depending on the Service Category and Type options.
Table 34. Create Traffic Descriptor Screen Options
Option
Description
Function
1
Name
This option is used to name the new traffic descriptor using
up to ten alphanumeric characters.
2
Service Category
This option is used to select a service category. Options are
as follows:
• CBR (Constant Bit Rate)
• rtVBR (real time Variable Bit Rate)
• nrtVBR (non-real time Variable Bit Rate)
• UBR (Unspecified Bit Rate)
3
Type
This option is used to select one of the following standard
traffic descriptor types:
• No Policing
• atmNoClpNoScr
• atmClpNoTagNoScr
• atmClpTagNoScr
• atmNoClpTagNoScr
• atmNoClpNoScrCdvt
4
PCR (0+1)
This option is used to set the Peak Cell Rate (PCR) value to a
number from 0 to 1500000.
5
Frame Discard
This option is used to enable or disable Frame Discard.
6
Create
This option is used to create a new traffic descriptor with the
parameters from the options above. This menu item must
be selected to complete the creation of each traffic
descriptor.
