ADTRAN 1202052L1, User Manual

Page: 72 / 136

Chapter 5. Configuration Menu
5-16 TSU 100 User Manual 61202052L1-1
DS0 Map Example
A sample selection follows:
DS0: 01 to 24
PORT: IDLE, TST, + option module ports
TST designates which DS0s are used for QRSS testing when
activated under the
4)TEST Menu
. When not used for testing,
the TST designation is identical to
Idle
.
1. With the cursor on
CREATE TEMP
, press
Enter
. The unit
displays the selection screen with the cursor positioned on
the first selection DS0 number. See Figure 5-8.
Figure 5-8. Create Temp Selection Screen
2. Use either the
Arrow Keys
or
Numbers
to enter the DS0
number (do not mix the use of the keys).
3. Press
Enter
to complete the selection and move the cursor
to Port , the next field.
4. Use the
Arrow Keys
to select the port which is dependent on
the installed option card.
5. Press
Enter
to complete the selection and move the cursor
back to the DS0 field.
6. With the cursor on the DS0 field, the DS0 number can be
incremented or decremented by scrolling.
Select DS0 Number
Select Port