ADTRAN 1202052L1, User Manual

Page: 5 / 136

v
FCC regulations require that the following information be provided to
the customer
1. This equipment complies with Part 68 of the FCC rules. The re-
quired label is attached to the bottom of the chassis.
2. An FCC compliant telephone cord and modular plug is provided
with this equipment. This equipment is designed to be connected
to the telephone network or premises wiring using a compatible
modular jack which is Part 68 compliant. See installation instruc-
tions for details.
3. If your TSU 100 causes harm to the telephone network, the Tele-
phone Company may discontinue your service temporarily. If
possible, they will notify you in advance. If advance notice is not
practical, you will be notified as soon as possible. You will be ad-
vised of your right to file a complaint with the FCC.
4. Your telephone company may make changes in its facilities,
equipment, operations, or procedures that could affect the prop-
er operation of your equipment. If they do, you will be given ad-
vance notice so as to give you an opportunity to maintain
uninterrupted service.
5. If you experience trouble with the equipment TSU 100, please
contact ADTRAN at (256) 963-8000 for repair/warranty informa-
tion. The telephone company may ask you to disconnect this
equipment from the network until the problem has been correct-
ed, or until you are sure the equipment is not malfunctioning.
6. This unit contains no user-serviceable parts.
7. The following information may be required when applying to
your local telephone company for leased line facilities.
Service Type REN/SOC FIC USOC
1.544 Mbps -SF 6.0N 04DU9-BN RJ-48C
1.544 Mbps - SF and B8ZS 6.0N 04DU9-DN RJ-48C
1.544 Mbps - ESF 6.0N 04DU9-1KN RJ-48C
1.544 Mbps - ESF and B8ZS 6.0N 04DU9-1SN RJ-48C