Unit Installation
NetVanta 3200/3300/3400 Series
72
Copyright © 2019 ADTRAN, Inc.
61200860L1-34AE
Using a USB Cellular Modem with the NetVanta USB WWAN NIM
The NetVanta USB WWAN NIM contains a Type A USB connector that supports a variety of third-party
USB cellular modems.
Remove power from the base unit.
Remove the cover from the base unit’s option slot.
Slide the USB WWAN NIM into the option slot until the module is firmly seated against the
chassis.
Secure the pins at both edges of the module.
Restore power to the base unit.
Refer to the quick start guide that shipped with the NetVanta USB WWAN NIM for instructions
on obtaining a cellular account and activating your USB cellular modem.
An optional USB Locking Mechanism is available from ADTRAN (P/N 1700643G1) to
lock the USB to the NetVanta USB WWAN NIM.
Visit the NetVanta USB WWAN NIM product page at
http://www.adtran.com
for a list of
supported third-party USB cellular modems.
•
Always remove power from the unit prior to removing or installing a module.
•
Improper installation may result in damage to the modules.
Instructions for Installing a USB Cellular Modem in the USB WWAN NIM
Step
Action
1
2
3
4
5
6
