Appendix A. Dial Plan Interface Configuration
A-4
Octal and Quad FXO Modules User Manual
61200310L1-1
S
OURCE
ID
Write security: 3; Read security: 5
Simplifies the creation of a
D
IAL
P
LAN
in applications where the criterion for
switching calls to a certain endpoint is a function of which endpoint origi-
nated the call.
•
Default value = 0. The default ID for all endpoints is 0 and all accept
numbers is 0. With default values, all calls are routed based only on the
dialed number.
•
Multiple endpoints can have the same
S
OURCE
ID
.
•
When creating the
C
ALL
A
CCEPT
list, specify a
S
OURCE
ID
(s) as well as a
dialed number or range of dialed numbers to accept.
E
XAMPLE
:
An application requires that all calls that originate from Port 1 of the mod-
ule in Slot 1 be switched to Port 2 of that same module. Assign a unique
Source ID (e.g., 7) to Port 1 of the module, and then configure Port 2 to only
accept calls from that unique Source ID (7).
