ADTRAN 1200212L1, User Manual

Page: 100 / 172

Chapter 9. System Configuration
9-2 DSU IQ User Manual 61200212L1-1
Figure 9-1. System Configuration Menu
IP Address (IP ADDRESS)
Enter the IP address. The IP address is used when an ethernet
packet is transmitted from the DSU IQ to a foreign subnet. This
option is only available if the ethernet card is installed.
Control Port Mode (CNTL PORT MODE)
Set the control port for Terminal, SLIP Protocol, or PPP Protocol
mode. Set for SLIP or PPP when using the
C
ONTROL
port for an
SNMP/TELNET path.
Read Community Name (RD COM NAME)
Enter the authentication strings used for SNMP management.
Match the DSU IQ to the SNMP manager for read privileges. If
using front panel entry, see Using the Front Panel on page 9-6 for
more information.
ADTRAN DSU IQ
Local
Configure Unit
1 - Change Password
2 - IP Address 0.0.0.0
3 - Control Port Options
4 - Read Community Public
5 - Write Community Private
6 - Trap Mgr Options
7 - Protocol 1 None
8 - Protocol 2 None
9 - System Name
10 - System Time 08:01:39
11 - System Date 02/24/00
12 - History Interval Size 30 Min
Enter Selection --> _