35
[CONNECTION AND SETUP]
Connection and Diagram
The following diagram illustrates the basic setup of the AS4L01X and BX08R:
Connection Guide
Step1.
Insert SD card into the AS4L01X, push the SD card all the way in until a soft click sound is heard and the SD card
locks into place
(ensure that the SD card is inserted in the correct direction)
Step2.
Connect the push buttons to the BX08R via RJ-11. Button order starts from left to right, 1 to 8. In the event where not
all 8 buttons are to be used, connect only the desired amount of buttons.
(For example: if only 5 selectable media
contents are to be used, connect the buttons from ports 1 to 5 only)
Step3.
Ensure that the Terminal ID is set to 1 and that the Terminal LED indicator for 1 is lit up.
Step4.
Connect D-Sub9 cable to the AS4L01X via D-Sub9 Out port and aD-Sub9 In port on the AS4L01X side.
NOTE: AS4L01X supports Power Over Cable (PoC). The power for BX08R is supplied through AS4L01X.
Step5.
Ensure Repeat D
efault setting is “ON” on AS4L01X
.
Step6.
Turn on the power of AS4L01X.
Step7.
LED buttons connected properly will blink if there are contents assigned to that button. Pressing the button triggers
the assigned media content to play and the button will light up for the duration of the media content. Buttons with no
content assigned to it will not blink or light up.
