Adtec EN-200 User Manual Download Page 58 | Manualshive

Page: 58 / 67

background image

Appendix B - Technical Specifications

Base Model (EN200)

Inputs

SD-SDI / HD-SDI / 3G-SDI
Use: Video & Audio input
Standard: SD - SMPTE 259M-C - 270Mbit/s with embedded audio per SMPTE 272M A, B, and C. HD -
SMPTE 292M - 1.485Gbit/s with embedded audio per SMPTE 299M. 3G-SDI Level A and Level B.
Connector: BNC (75 Ohm). Auto Detect SD/HD/3G or manual configuration.
Note

: This connector serves as the DVB-ASI input when configured for ASI receive mode. This mode

allows for the use of the modulator ‘PASSTHROUGH’ feature.

SFP Slot
Use: Video & Audio input
Standard: With optional SFP Optical module, supports SD-SDI, HD-SDI, and 3G-SDI (

3G-SDI Level A

and Level B).
Connector: Open SFP cage for optional SFP optical module.

CVBS
Use: Video input
Standard: SD NTSC or PAL D1 Composite Video Input
Connector: BNC (75 Ohm)

AES Audio
Use: Digital audio input (x8 pairs or x16 channels) for uncompressed LPCM or compressed bit stream
processing
Standard: AES3
Connector: Eight BNC (75 Ohm)

SDI Embedded Audio
Use: Digital audio input (x8 pairs or x16 channels) for uncompressed LPCM or compressed bit stream
processing
Standard: Digital audio embedded per SMPTE 272M (SD) and SMPTE 299M (HD)
Connector: SFP module or BNC (75 Ohm)

Analog Audio
Use: Analog Balanced Stereo input (x2). Analog audio input via DB15 male connector. Clip level
18dB.
Connector: DB15 (10 kohm)
*** See “DB15-M Analog audio input pinout” in this Appendix.

«
...
56
57
58
59
60
...
»

Summary of Contents for EN-200




































































Reviews:

No comments

Related manuals for EN-200

Brand: Danfoss Pages: 94

Brand: YMGI Pages: 64

Brand: matson Pages: 11

Brand: NAIM Pages: 22

BeoLink Converter NL/ML

Brand: Bang & Olufsen Pages: 45

Brand: GALAGAR Pages: 28

samlexsolar SPB-EXPLORE200

Brand: Samlexpower Pages: 2

Brand: York Pages: 41

Brand: Portable Power Technology Pages: 4

Z-IP Encode 004

Brand: Z-Band Pages: 22

Brand: T+A Pages: 64

Brand: Larson Electronics Pages: 33

Brand: QUAD Pages: 38

Brand: Q CELLS Pages: 11

Brand: ELGO Electronic Pages: 40

CSI-75K-T40001-E

Brand: CanadianSolar Pages: 19

Brand: CYP Pages: 23

Brand: Miteq Pages: 55

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands