Hybrid Standalone NVR User Guide
Overlay
Click the
Overlay
button to open the Overlay dialog, which determines whether the following items
are displayed on the monitor screen.
Figure 3-33
•
Cover Area (Privacy Mask).
This section is for setting the Privacy Mask. In the dialog, use
your mouse to set the desired mask size and location. In single channel video mode, the
system supports a maximum of 4 zones in one channel.
•
Preview/Monitor.
Privacy mask has two types: Preview and Monitor. Preview means the
Privacy Mask zone cannot be viewed by user when in live video mode. Monitor means the
Privacy Mask zone cannot be view by the user when in playback mode.
•
Time Display.
Select whether the time is displayed during playback. Click the
Set
button
and then drag the title to the corresponding position in the screen.
•
Channel Display.
Select whether the system displays the channel number during playback.
Click the
Set
button and then drag the title to the corresponding position in the screen.
Snapshot
Click the
Snapshot
button to set snapshot mode, picture size, quality and frequency. Refer to section
on page 24.
Figure 3-34
•
Mode:
There are two modes: Timing (Schedule) and activation. If you set timing mode, you
need to set the snapshot frequency. If you set activation snapshot, you need to go to the
Detect interface (
Main Menu > Setting > Detect
) to set snapshot activation operation.
•
Image Size:
Set the snapshot picture size.
NVR32xx-P Series User Guide
55
