Hybrid Standalone NVR User Guide
To use the FTP feature:
1.
Check the
Enable
box to activate the FTP function.
2.
Input the FTP account information:
•
FTP
Server IP
number
•
Port
number
•
User
Name
and
Password
you use to log into the FTP.
•
Optionally check the
Anonymous
box for servers that support the anonymity function,
which allows you to automatically login anonymously. If enabled, you do not need to
input the user name, password or the sender information.
3.
Enter the
Remote
Directory
.
4.
Enter the upload
File
Length
.
File length is upload file length. When this value is larger than the actual file length, the
system uploads the whole file. When this value is smaller than the actual file length, the
system only uploads the set length and automatically ignores the left section. When interval
value is 0, system uploads all corresponding files.
5.
Set the
Image
Upload
Interval.
6.
Use the drop-down menu to select the upload file
Channel
.
7.
Use the drop-down menu to select the day.
8.
Set the
Time
Period
and type of event:
Alarm
,
MD
(motion detection) or
Regular
.
9.
Click
Save
.
4.7.4.3
Record Control
This feature enables you to manually override the automatic record settings.
Figure 4-78
There are two modes of operation: Main Stream and Extra Stream; and three status settings for each
mode: Schedule, Manual and Stop.
NVR32xx-P Series User Guide
198
