ADT DVR7800S-U Series, User Manual, Page: 25 / 285

2 Getting Started
2.2 Startup Sequence
After login, the Startup Wizard gives you the option of setting up some basic system parameters. You
can enter this information now or at a later time, as follows:
•
General , as described on page 109
•
Network , as described on page 64
•
Remote Device , as described on page 51
•
Schedule
, as described on page 101
1. For each option, click Next Step to move to the next dialog or Pre Step to return to the previous.
2. After completing the final dialog, click Finished . A popup message says Startup Finished. Click OK
to accept.
Figure 2-4
3. If you click Cancel to exit the startup sequence, a popup message asks if you are sure. Click OK .
4. If you do not want the Startup Wizard to appear the next time you start up the system, clear the
Startup box.
DVR7800S-U Series Hybrid DVR User Guide
15