Hybrid Standalone DVR User Guide
b)
If it is your second time to insert the PoE, the system can check the saved MAC address
according to the <Channel>---<IPC mac> map to make sure that the current IPC has
connected. If the system finds the previous information and the channel is idle, the system
can map it to the previously used channel. Otherwise system goes to the next step.
c)
Thirdly, according to the <PoE port>---<Channel> map, the system knows the previous
mapping channel of the current PoE port. The system can select current channel if it is free.
Otherwise, it goes to the next step.
d)
Fourthly, system goes to find the first idle channel it can get.
Generally speaking, once you insert the PoE, the system follows the previously listed steps to find the
channel available.
4.
When you insert PoE, all channels are now in use
The system can pop up a dialog box for you to select a channel to overwrite. The title of the pop-up
interface is the name of the current operation PoE port. In this interface, All PoE channels become
gray and cannot be selected.
4.3
Login
To log in:
1.
Open the browser and input the DVR IP address. For example, if your DVR IP is
192.168.1.108, then input
http://192.168.1.108
.
Figure 4-1
A pop up window appears asking you whether to install the
Webrec.cab
control.
2.
Click
Yes
to install
Webrec.cab.
Input your IP
address here
DVR7800S-U Series Hybrid DVR User Guide
142