Security System Operation (Cont'd)
21
How to Remove Bypassed Zones
A bypassed zone will automatically be unbypassed when you disarm
the system. If a zone is bypassed, you can remove the bypass as
follows:
SCREEN ACTION
1. View bypassed zones by pressing the
SHOW ZONES
button.
While the TouchCenter is requesting and
receiving the zone data from the control
panel, the screen displays "
Please Wait!
".
Then the zones, along with their current
status, are displayed.
2. Remove zone bypasses by pressing
the
CLEAR BYPASSES
button.
Note:
Bypassed zones are indicated by
the Bypass icon
.
3. The "User Authorization" screen is
displayed with the instructions To Clear
Bypasses, Enter Code.
Note:
If the system is armed and you
unbypass a zone, it will disarm the
system.
Enter your 4-digit user code. The "More
Choices" screen is displayed showing the
system as
Ready to Arm
.
Note:
This will not occur if any zone(s) is
open (not ready).
