OPC7000 series
15
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
3.4 Intended use
The Panel PCs are designed for the control and monitoring of machines and equipment.
The unit is intended for installation in electrical panels, consoles and cabinets.
The device has to be
assembled, installed and operated within the permissible specifications. Use in non-specified
environments is prohibited.
3.5 Improper use
Operation other than or beyond that described for the device shall be deemed improper use.
The device is not allowed to be used to control vehicles or for applications for which further approvals
beyond the manufacturer's declaration are necessary, e.g. applications with explosion hazard, medical
technology, shipping industry.
The device must not be put into operation in the case of transport damage or nonconformity with the
specifications and, if necessary, must be taken out of operation in the case of changing conditions.
In the case of improper use, ADS-TEC shall not accept responsibility or liability for injury or damage that
is directly or indirectly attributable to the handling of the device.
Should the device have evident signs of damages caused, e.g., by improper operation or
storage conditions or due to improper use or handling, it must be shut down immediately.
Ensure that it is secured against being started up accidentally.
