How to connect the ADS1000 external gas sampling system
To connect the external gas sampling system perform the following steps:
1) Insert the Luer lock connector to the gas sampling input and
rotate it clockwise one
half turn
.
2) Connect the two breathing circuits ends to the breathing circuit ports.
3) Now insert the gas sampling elbow into the end of the breathing circuit as shown.
4) Insert the Luer lock connector to the gas sampling elbow and
rotate it clockwise one
half turn
.
5) Connect breathing circuit to the gas sampling elbow.
1099 East 47 Street, Hialeah, Florida 33013
305-688-8581 - 800-445-8581 - FAX 305-685-7671
3) Connect
Gas
sampling
elbow
4) Connect
Luer lock
connector
5) Connect
breathing
circuit
2)
Connect
breathing
circuit
1) Connect
Luer lock
connector
