ADRF PSR-78-9533-UB, Manual

Page: 26 / 59

Advanced RF Technologies, Inc. 26
5 INSTALLATION
5.1 Installation Procedures
5.1.1 Wall Mount Procedure

Verify that the PSR-78-9533-UB and mounting holes are in good condition

Place the PSR-78-9533-UB mounting bracket template up against the wall and mark off mounting holes

Drill the appropriate size holes and install the included wall anchors

Remove the wall mount bracket from the repeater and bolt the wall mount bracket to the wall

Place the repeater onto the wall mount bracket and secure the bracket to the repeater

Connect the GND cable

Connect the Antenna cables

Connect the Power cable
Figure 5-1 Wall Mount
5.1.2 PSR-ANN Annunciator Installation
The PSR-ANN annunciator box has been designed to either mount on top of the PSR-78-9533-UB repeater or
can also be wall mounted separately. By default, the mounting bracket is configured to mount to the top of the
repeater with the mounting bracket at the bottom of the PSR-ANN annunciator box. If individually wall mounting
the PSR-ANN, then the bracket will need to moved from the bottom of the box to the back of the box.
Once the PSR-ANN annunciator box has securely mounted, connect the included power/data cable from the
side of the PSR-ANN box to the port labeled Annunciator on the PSR-78-9533-UB.
Wall Mount
Bracket