ADRF PSR-78-9533-UA, Manual

Page: 34 / 60

Advanced RF Technologies, Inc. 34
7. PSR-78-9533-UA WEB-GUI SETUP INTRODUCTION
The Web-GUI allows the user to communicate with the repeater locally. To connect to the repeater locally,
you will need a laptop with an Ethernet port and an RJ-45 crossover cable.
NOTICE TO USERS, INSTALLERS, AUTHORITIES HAVING JURISDICTION, AND OTHER INVOLVED PARTIES
This product incorporates field-programmable software. In order for the product to comply with the requirements in
the Standard for in-building 2-Way Emergency Radio Communication Enhancement Systems, UL 2524 certain
programming features or options must be limited to specific values or not used at all as indicated below.
Program feature or option Permitted in UL 2524?
(Y/N) Possible settings Settings permitted in
UL 2524
Remote Power Switch N Enable/Disable Disable
Battery Not Charge Check Y On/Off On
Battery Check Y Check All/Except
Installed/Check Off Check All
Donor Antenna Malfunction
Check Time Y 0sec, 10sec, 45sec, 90sec,
3min, 6min, 15min, 30min,
1hour, 2hour, 4hour, 8hour,
12hour, 24hour, and 48hour 0sec, 10sec, 45sec,
90sec, 3min, 6min,
15min, 30min, 1hour,
2hour, 4hour, 8hour,
12hour, and 24hour
Please note that some selections of the Donor Antenna Malfunction Check Time setting could impact the
compliance of the UL 2524 code. The selections available for this option are 0sec, 10sec, 45sec, 90sec, 3min,
6min, 15min, 30min, 1hour, 2hour, 4hour, 8hour, 12hour, 24hour, and 48hour. Selection of 24 hours or less
will be required to remain compliant with UL 2524.
Figure 7-1 Donor Antenna Malfunction Check Time