ADOBE PREMIERE PRO 2.0
User Guide
246
Because the Position, Scale, and Rotation properties are spatial in nature, it’s best if they are adjusted directly in the
Program Monitor. When you click the Transform icon
next to the Motion effect in the Effect Controls panel,
handles appear on the clip in the Program Monitor that let you directly manipulate the clip and adjust the Motion
effect properties. Although the anchor point also appears in the Program Monitor, it can be adjusted only in the
Effect Controls panel. However, the Program Monitor updates any changes to the anchor point as you make them.
Program monitor
A.
Anchor point
B.
Handle
Standard effects that allow direct manipulation of clips in the Program Monitor include Corner Pin, Crop, Garbage
Matte, Lighting Effects, Mirror, Transform, and Twirl. This capability is indicated by the Transform icon
next
to the effect name in the Effect Controls panel.
See also
“To adjust position, scale, and rotation” on page 246
“About keyframes” on page 230
To adjust position, scale, and rotation
You can adjust the position, scale, and rotation of a clip and Lighting Effects lights by directly manipulating handles
in the Program Monitor. You can also adjust the properties using the controls in the Effect Controls panel.
Note:
Direct manipulation is also available for the following effects: Corner Pin, Crop, Garbage Matte, Mirror,
Transform, and Twirl.
1
Select a clip in the Timeline panel.
2
Do one of the following:
•
(Lighting Effects only) Apply the Lighting Effects to the clip and then click the Transform icon
next to
Lighting Effects in the Effect Controls panel.
•
(Motion effect only) Click the image in the Program Monitor or click the Transform icon next to Motion in the
Effect Controls panel.
B
A