ADOBE PREMIERE PRO 2.0
User Guide
146
To create a split edit
1
If necessary, click the triangle to the left of each track name to expand the audio tracks you want to adjust.
2
Select one of the clips involved in the split edit, and choose Clip > Unlink. Repeat for the other clip.
3
Select the Rolling Edit tool
from the toolbox.
4
Starting at the audio edit point between the two clips, drag left or right.
Note:
If nothing happens, make sure that before you start dragging, you position the pointer over the visible audio edit
point, not over an applied audio transition.
To set source In and Out points for a split edit
1
Open a clip in the Source Monitor, and set the current time to the frame you want to set as a video or audio In or
Out point.
2
In the Source Monitor, choose Marker > Set Clip Marker, and select Video In, Video Out, Audio In, or Audio Out.
3
Set the remaining video and audio In and Out points. (When you add the clip to a sequence, the video portion
starts and ends at different times than the audio.)
Creating special clips
To create a counting leader
If you plan to create film output from a sequence, you may want to add a counting leader. A counting leader helps a
projectionist verify that audio and video are working properly and are synchronized. You can create and customize
a universal counting leader to add to the beginning of a project. The leader is 11 seconds long.
❖
In the Project panel, click the New Item button
at the bottom of the Project panel and choose Universal
Counting Leader from the menu that appears. Specify the following options as needed:
Wipe Color
Specifies a color for the circular one-second wipe area.
Background Color
Specifies a color for the area behind the wipe color.
Line Color
Specifies a color for the horizontal and vertical lines.
Target Color
Specifies a color for the double circles around the numeral.
Numeral Color
Specifies a color for the countdown numeral.
Cue Blip On Out
Displays a small cue circle in the last frame of the leader.
Cue Blip On 2
Plays a beep at the two-second mark.
Cue Blip At All Second Starts
Plays a beep at the beginning of every second during the leader.
You can customize a counting leader clip by double-clicking it in the Project panel.