manualshive.com logo in svg

Adobe PREMIERE 5, User Manual, Page: 204 / 404

Share
Download
Adobe PREMIERE 5 User Manual Download Page 204

CHAPTER 4

196

Editing Video

You can separate the Monitor view from the Monitor window controllers for additional flexi-
bility in arranging your Premiere work area. Premiere lets you move the Monitor view to 
another monitor while keeping the controllers with the other windows and palettes in 
Premiere. To do this, your computer and operating system must support a multiple-monitor 
desktop.

To preview the Monitor Program view on another monitor:

1

In the Monitor window, click the Collapse button ( ) at the lower right edge of the window. 

The Monitor window divides into a Monitor window containing the source and program 
controllers and a Monitor View that shows the frame at the timecode of the active controller.

2

Click the triangle below the Monitor window title bar ( ) and choose Single View from the 

Monitor window menu to display only the Source or Monitor view, depending on the active 
controller (see “Setting up windows that resemble earlier Premiere versions” on page 74).

Monitor View in single view (top) and collapsed controllers (bottom)

c00.book for PS  Page 196  Tuesday, March 31, 1998  1:28 PM

Summary of Contents for PREMIERE 5





















































































































































































































































































































































































































Reviews:

No comments