4
Getting Started
(Windows and Mac OS) You should also install the Classroom in a Book fonts by copying
all the files in the fonts folder on the Adobe FrameMaker 7.0 Classroom in a Book CD to the
fonts folder within the folder in which you installed FrameMaker 7.0 on your hard disk.
Doing so makes the fonts available to FrameMaker 7.0 but not to other applications. (If there
is no fonts folder in the same folder where the program is installed, add a folder named
fonts
(all lower case), and then copy the fonts into it.
Copying the Classroom in a Book files
The Classroom in a Book CD includes folders containing all the electronic files for the
lessons. Each lesson has its own folder, and you must copy the folders to your hard drive
to do the lessons. To save room on your drive, you can choose to install only the folder for
each lesson as you need it, and remove it when you’re done.
To install the Classroom in a Book files:
1
Make sure the
Adobe FrameMaker 7.0 Classroom in a Book
CD is in your CD-ROM
drive.
2
Create a folder named FM_CIB on your hard drive.
3
Copy the lessons you want to the hard drive:
•
To copy all of the lessons, drag the Lessons folder from the CD into the FM_CIB folder.
•
To copy a single lesson, drag the individual lesson folder from the CD into the FM_CIB
folder.
Note:
If you are installing the files in UNIX, follow the instructions in Appendix D, “Copying
the Sample Files (UNIX).”
Note:
If you are installing the files in Windows, you need to unlock them before using them.
You don’t need to unlock the files if you are installing them in Mac OS.
4
In Windows, unlock the files you copied:
•
If you copied all of the lessons, double-click the unlock.bat file in the Lessons folder
within the FM_CIB folder.
•
If you copied a single lesson, drag the unlock.bat file from the Lessons folder on the CD
into the FM_CIB folder. Then double-click the unlock.bat file in the FM_CIB folder.
L00.fm Page 4 Saturday, July 6, 2002 11:16 AM