manualshive.com logo in svg

Adobe 65029121 - Flash Media Streaming Server, Configuration And Administration Manual, Page: 5 / 257

Share
Download
Adobe 65029121 - Flash Media Streaming Server Configuration And Administration Manual Download Page 5

1

Last updated 11/28/2012

Chapter 1: Deploying the server

Configure ports

When you install Flash Media Server, you can accept the default ports on which Flash Media Server and Flash Media 
Administration Server listen. You can also enter new ports. The default ports for Flash Media Server are 1935 and 80. 
The default port for Flash Media Administration Server is 1111.

To test which ports a client can connect to on a Flash Media Server hosted by Stefan Richter of FlashComGuru, 
see 

FlashComGuru Port Tester

.

To test which ports a client can connect to on your own Flash Media Server, use a 

port tester

 developed and hosted 

by Jake Hilton. 

Port requirements

The following table describes ports on which clients must be able to establish connections to the server:

Port number

Protocol

Transport

Description

1935

RTMP/E

TCP

By default, Flash Player and AIR clients make RTMP 
connections to Flash Media Server over port 1935 
over TCP. 

To communicate with Flash Media Server over the 
RTMP protocol, clients attempt to connect to ports 
in the following order: 1935, 80 (RTMP), 80 (RTMPT). 

1935

RTMFP

UDP

By default, Flash Player and AIR clients make RTMFP 
connections to Flash Media Server over port 1935 
over UDP. 

80

RTMP/E, RTMTP, HTTP

TCP

By default, Flash Player and AIR clients that cannot 
connect to Flash Media Server over port 1935 
attempt to tunnel over port 80 (RTMPT). 

If Apache is installed and enabled, HTTP requests 
made over port 80 are proxied to Apache over port 
8134.

HTTP Streaming requests to port 80 can hang when 
proxying to port 8134. Use port 8134 in the request 
or configure Apache to listen directly on port 80 
and configure Flash Media Server not to listen on 
port 80.

Summary of Contents for 65029121 - Flash Media Streaming Server


































































































































































































































































Reviews:

No comments