manualshive.com logo in svg

Adobe 65029121 - Flash Media Streaming Server, Configuration And Administration Manual, Page: 29 / 257

Share
Download
Adobe 65029121 - Flash Media Streaming Server Configuration And Administration Manual Download Page 29

25

FLASH

 MEDIA

 SERVER

 4.5

 CONFIGURATION

 AND

 ADMINISTRATION

Configuring the server

Last updated 11/28/2012

Even when you configure the server and application to use aggregate messages, the following circumstances will 
prevent them from being delivered:

•

The client’s Flash Player version is earlier than 9.0.60.0.

•

The stream is set to filter audio, filter video, or control FPS. 

•

The stream requires transcoding.

If any of these conditions are present, Flash Media Server breaks the aggregated message into its submessages, and the 
messages are delivered individually.

StreamManager/Live/Queue/MaxQu
eueDelay

Application.xml

Defines the maximum time (in milliseconds) that the live 
queue delays messages before the messages are transmitted.  

This setting can be used to ensure that unacceptable 
amounts of latency are not introduced into the publishing 
stream.   

Increasing the delay allows for larger aggregates to be 
created, which increases the efficiency of the server. 
Decreasing the delay reduces latency but is less efficient.

StreamManager/Live/Queue/Aggre
gateMessages

Application.xml

Determines whether or not aggregate messages are 
generated when the queue is flushed.  

When this setting is enabled, the messages in the queue are 
grouped together as aggregates to improve the efficiency of 
transmission.  

It is possible to enable queing and disable the generation of 
aggregate messages, but this does not result in performance 
benefits.

The default value is “true”.

StreamManager/Live/Queue/Aggre
gateMessages/MaxAggMsgSize

Application.xml

Defines the maximum size of an aggregate message that the 
server creates. The server can create smaller aggregates, as 
necessary. 

The server cannot create messages that are larger than the 

MaxQueueSize

, so this number is generally set to 

something less than or equal to the configured size of the 
queue.

Proxy/AggregateMessages

Vhost.xml

Determines whether aggregate messages are delivered from 
the edge cache when a vhost is configured as an edge proxy. 

The default value is "false".  

If the edge server receives aggregate messages from the 
origin when this setting is disabled, the messages are broken 
up before being cached.

Proxy/AggregateMessages/MaxAgg
MsgSize

Vhost.xml

Determines the size (in bytes) of aggregate messages 
returned from the edge cache when aggregate messages are 
enabled. 

This setting only applies to messages retrieved from the disk 
cache. Aggregate messages received directy from the origin 
server are returned as-is, and therefore their size is 
determined by the origin server's settings for aggregate 
message size.

Element

Configuration file

Description

Summary of Contents for 65029121 - Flash Media Streaming Server


































































































































































































































































Reviews:

No comments