manualshive.com logo in svg

Adobe 65029121 - Flash Media Streaming Server, Configuration And Administration Manual, Page: 250 / 257

Share
Download
Adobe 65029121 - Flash Media Streaming Server Configuration And Administration Manual Download Page 250

246

FLASH

 MEDIA

 SERVER

 4.5

 CONFIGURATION

 AND

 ADMINISTRATION

XML configuration files reference

Last updated 11/28/2012

Path

Specifies the physical location of the proxy cache. By default, the location is 

RootInstall

/cache/. The value must be an 

absolute path. Relative paths are ignored and the server uses the default folder.

See also

Proxy

Container element.

The elements nested in this section configure this virtual host as an edge server that can forward connection requests 
from applications running on one remote server to another server. 

Note: 

Whenever a virtual host is configured as an edge server, it behaves locally as a remote server.

If this virtual host is configured to run in 

remote

 mode and you want to configure the properties of an outgoing SSL 

connection to an upstream server, the SSL connection to upstream servers will use the default configuration specified 
in the 

SSL

 section of the Server.xml file.

Contained elements

Mode

, 

Anonymous

, 

CacheDir

, 

LocalAddress

, 

RouteTable

, 

EdgeAutoDiscovery

, 

SSL

, 

AggregateMessages

, 

RequestTimeout

RequestTimeout

The maximum amount of time, in seconds, the server waits for a response to a request from an upstream server. A 
request can be for metadata, content, and so on. This value -1 specifies an unlimited amount of time (no timeout). The 
default value is 2 seconds.

See also

CacheDir

ResourceLimits

Container element.

The elements in this section specify the maximum resource limits for this virtual host.

Contained elements

MaxConnections

, 

MaxEdgeConnections

, 

MaxAppInstances

, 

MaxStreams

, 

MaxSharedObjects

, 

AppInstanceGC

,

RouteEntry

Instructs the edge server to forward the connection request to one server’s IP address and port number [host:port] to 
a different IP address and port number.

Edge servers are configured with the 

RouteEntry

 element to direct connections to another destination. The 

RouteTable

 element contains the 

RouteEntry

 elements that control where the edge server reroutes requests. 

You can also add the 

protocol

 attribute to an individual 

RouteEntry

 element to specify how the edge server reroutes 

requests. If no protocol is specified, however, Flash Media Server applies the protocol specified in the 

RouteTable

 

element. Implicit proxies hide the routing information from the clients.

Summary of Contents for 65029121 - Flash Media Streaming Server


































































































































































































































































Reviews:

No comments