211
FLASH
MEDIA
SERVER
4.5
CONFIGURATION
AND
ADMINISTRATION
XML configuration files reference
Last updated 11/28/2012
MaxIdleTime
Located in the
AutoCloseIdleClients
container.
Specifies the maximum idle time allowed, in seconds, before a client is disconnected. The default value is 3600 seconds
(60 minutes). If you set a value of 60 or less, the server uses 1200 seconds (20 minutes).
A low value may cause unneeded disconnections. When you configure this element, consider the type of applications
running on the server. For example, if you have an application with which users watch short video clips, a user might
leave the window to idle out.
MaxInitDelay
The maximum number of seconds that is used to process SWF files. The default value is 5 seconds. This element is
used in the verification of SWF files.
Example
<MaxInitDelay>5</MaxInitDelay>
See also
SWFVerification
MaxIOThreads
Located in the
RTMP (Connector)
,
Edge
,
Core
,
Admin
,
ECCP
, and
ACCP
containers.
Specifies the maximum number of threads that can be created for I/O processing.
Use the following information to configure all I/O and connection threads processing:
•
A value of
0
allocates the default number of threads (10).
•
A value greater than 0 allocates the exact number of threads specified.
•
A value less than 0 ties the number of connection threads to the number (N) of processors, as follows:
•
-1 means 1 x N threads.
•
-2 means 2 x N threads, and so on.
Flash Media Server can receive connections through various protocols. The default value for this element varies
according to which container protocol it is nested within.
Container
Default Value
Description
ACCP
10
Use 0 for the default value.
Admin
10
Use 0 for the default value.
Core
10
Use 0 for the default value.
ECCP
10
Use 0 for the default value.
Edge
10
Use 0 for the default value.
RTMP
32
Use -1 for the default value.