manualshive.com logo in svg

Adobe 65029121 - Flash Media Streaming Server, Configuration And Administration Manual, Page: 207 / 257

Share
Download
Adobe 65029121 - Flash Media Streaming Server Configuration And Administration Manual Download Page 207

203

FLASH

 MEDIA

 SERVER

 4.5

 CONFIGURATION

 AND

 ADMINISTRATION

XML configuration files reference

Last updated 11/28/2012

GCInterval

Located in the 

HandleCache

 container.

Specifies in minutes how often to remove idle handles. The default is 60 minutes.

Example

 

<GCInterval>60</GCInterval>

GID

Located in the 

Process

 containers.

Specifies the group ID of the process. If you do not specify a 

UID

 or 

GID

, the server or Administration Server runs as 

root. This element is applicable to Flash Media Server running on Linux systems only. 

See also

UID

GlobalQueue

Container element.

The elements nested within the 

GlobalQueue

 container control the IPC message queue used by all processes to 

communicate with each other.

Contained elements

HeapSize

, 

MaxQueueSize

GlobalRatio

Located in the 

MessageCache

, 

SmallMemPool

, 

LargeMemPool

, and 

SegmentsPool

 containers.

Specifies the percentage of the message cache to be consumed by the free list on a global basis. When more free 
memory is available to a thread than the specified ratio, the freed memory returns to the operating system.

The range of this setting is from 0 (0%) to 1 (100%). The default setting is 0.4 (40%). 

Example

 

<GlobalRatio>0.4</GlobalRatio> 

HandleCache

Container element.

Contains elements that configure how to cache handles used for HTTP requests. This section is used for connections 
to Flash Remoting. 

Contained elements

MaxSize (HandleCache)

, 

IdleTime

, 

TrimSize

, 

GCInterval

Summary of Contents for 65029121 - Flash Media Streaming Server


































































































































































































































































Reviews:

No comments