manualshive.com logo in svg

Adobe 65029121 - Flash Media Streaming Server, Configuration And Administration Manual, Page: 206 / 257

Share
Download
Adobe 65029121 - Flash Media Streaming Server Configuration And Administration Manual Download Page 206

202

FLASH

 MEDIA

 SERVER

 4.5

 CONFIGURATION

 AND

 ADMINISTRATION

XML configuration files reference

Last updated 11/28/2012

FLVCache

Container element.

Contains elements that control the size and features of the recorded media cache.

Contained elements

FileCheckInterval

, 

MaxSize (FLVCache)

, 

MaxKeyframeCacheSize

FLVCachePurge

Located in the 

ResourceLimits

 container.

Specifies how often, in minutes, to remove unused files from the cache. The default value is 60 minutes. The minimum 
value is 1 minute. If you specify a value of less than 1minute, the default value of 60 is used.

FLVCacheSize

Located in the 

ResourceLimits

 container.

Specifies the maximum size of the recorded media cache. The recorded media cache size is specified as a percentage of 
the total available RAM on the system. The default setting for the cache size is 10 (10%). The maximum setting is 100 
(100%), in which case virtual memory will also be used.

Use this setting to configure the cache for optimal memory use. If you are receiving “cache full” events in the core log 
file or want to increase the chance that streams will find the information needed in the cache, increase the size of the 
cache. To minimize the amount of memory used in the server process, decrease the size of the cache.

Example

 

<FLVCacheSize>10</FLVCacheSize> 

FreeMemRatio

Located in the 

MessageCache

, 

SmallMemPool

, 

LargeMemPool

, and 

SegmentsPool

 containers.

Specifies the maximum percentage of total memory that the total pool size may occupy. The range of this setting is 
from 0 (0%) to 1 (100%). The default setting is 0.5 (50%). 

Example

 

<FreeMemRatio>0.5</FreeMemRatio> 

FreeRatio

Located in the 

MessageCache

, 

SmallMemPool

, 

LargeMemPool

, and 

SegmentsPool

 containers.

Specifies the percentage of the message cache to be consumed by the free list on a per-thread basis. The range of this 
setting is from 0 (0%) to 1 (100%). The default setting is 0.125 (12.5%). 

When more free memory is available to a thread than the specified ratio, the freed memory returns to the global pool.

Example

 

<FreeRatio>0.125</FreeRatio>

Summary of Contents for 65029121 - Flash Media Streaming Server


































































































































































































































































Reviews:

No comments