manualshive.com logo in svg

Adobe 65029121 - Flash Media Streaming Server, Configuration And Administration Manual, Page: 173 / 257

Share
Download
Adobe 65029121 - Flash Media Streaming Server Configuration And Administration Manual Download Page 173

169

FLASH

 MEDIA

 SERVER

 4.5

 CONFIGURATION

 AND

 ADMINISTRATION

XML configuration files reference

Last updated 11/28/2012

OutChunkSize

Specifies the RTMP chunk size in bytes to use in all streams for this application. The server breaks stream content into 
chunks of this size. Larger values reduce CPU usage but cause larger writes that can delay other content on lower 
bandwidth connections. This can have a minimum value of 128 bytes and a maximum value of 65536 bytes. The 
default value is 4096.

Note that older clients might not support chunk sizes larger than 1024 bytes. If the chunk setting is larger than these 
clients can support, the chunk setting is capped at 1024 bytes.

Example

 

<OutChunkSize>4096</OutChunkSize>

See also

Bandwidth

, 

BandwidthCap

, 

BandwidthDetection

, 

MsgQueue

, 

HTTPTunnel

, 

MaxMessageSizeLosslessVideo

OverridePublisher

Deprecated; see the 

PublishTimeout

 element.

Specifies whether a second client is able to take over the ownership of a live stream when the stream is already 
published by another client. The default value is 

false

. If set to 

true

, add application logic to avoid stream name 

collision.

Example

 

<OverridePublisher>true</OverridePublisher>

See also

Audio

, 

Live (StreamManager)

, 

SendDuplicateStart

, 

SendDuplicateOnMetaData

Password

Specifies the password for connecting to the proxy.

See also

Host

, 

Port

, 

Type

, 

Tunnel

, 

Username

PeerLookupEvents

Flash Media Server 4.5

In a peer-assisted networking application, use this element to configure how the server handles peer lookup events. 

RTMFP clients establish direct peer-to-peer connections through the use of NetStream 

DIRECT_CONNECTIONS

 and 

peerIDs, or by using NetGroup to join a Flash Group where clients can be automatically bootstrapped to neighbors or 
can manually initiate connections to them. The process of establishing a peer-to-peer connection begins with the 
initiating client sending a peer lookup request to the server. These events are processed differently depending upon the 

mode

 attribute. 

The following are possible values of the 

mode

 attribute:

Summary of Contents for 65029121 - Flash Media Streaming Server


































































































































































































































































Reviews:

No comments