manualshive.com logo in svg

Adobe 65029121 - Flash Media Streaming Server, Configuration And Administration Manual, Page: 152 / 257

Share
Download
Adobe 65029121 - Flash Media Streaming Server Configuration And Administration Manual Download Page 152

148

FLASH

 MEDIA

 SERVER

 4.5

 CONFIGURATION

 AND

 ADMINISTRATION

XML configuration files reference

Last updated 11/28/2012

CombineSamples

Container element.

The server conserves system resources by combining sound samples. This strategy saves the CPU and bandwidth 
overhead when transmitting individual audio packets only.

Note: 

Use this strategy of combining sound samples advisedly during periods of high CPU usage, as it can cause latency.

Contained elements

LoCPU

, 

HiCPU

, 

MaxSamples

, 

Subscribers

ContentProtection

The 

enabled

 attribute can be set to 

"true"

, 

"false"

 or 

"allow"

. Content protected is enabled when the attribute is 

set to 

"true"

, and disabled when set to 

"false"

. If 

enabled

 is set to 

"allow"

, settings in the Event.xml 

ContentProtection

 section can override the 

ContentProtection

 section in the Application.xml file.

<HDS>  

<!-- This section controls the behavior of HTTP live recording -->  
<Recording>  

<ContentProtection enabled="allow">  
</ContentProtection>  

</Recording>  

</HDS>

See also

Protected HTTP streaming

Connections

Container element.

The elements in this section configure the HTTP connections for this application.

Contained elements

MaxTimeOut (Connections)

, 

Reuse

, 

Interface

DataSize

Specifies the amount of data in bytes that the server sends to the client. To detect the client’s bandwidth, the server 
attempts to send a series of random blocks of data to the client, each time sending this much more data. For example, 
x bytes are sent, followed by 2x bytes, followed by 3x bytes, and so on until 

MaxWait

 time has elapsed. 

Example

 

<DataSize>16384</DataSize>

See also

MaxRate

, 

MinBufferTime (Live)

Debug

Container element.

Summary of Contents for 65029121 - Flash Media Streaming Server


































































































































































































































































Reviews:

No comments