manualshive.com logo in svg

Adobe 65029121 - Flash Media Streaming Server, Configuration And Administration Manual, Page: 138 / 257

Share
Download
Adobe 65029121 - Flash Media Streaming Server Configuration And Administration Manual Download Page 138

134

FLASH

 MEDIA

 SERVER

 4.5

 CONFIGURATION

 AND

 ADMINISTRATION

XML configuration files reference

Last updated 11/28/2012

Contained elements

RTMPE

RTMPE

Specifies whether encrypted RTMP (RTMPE) can be used. RTMPE is the encrypted RTMP protocol covering both 
RTMPE and RTMPTE. This element is enabled by default; setting 

enabled

 to 

false

 will not allow RTMPE or 

RTMPTE on this adaptor.

Example

 

<RTMPE enabled="true"></RTMPE>

See also

RTMP

SetCookie

Specifies whether or not the server sets a cookie. 

If the server does not have an externally visible IP address, then for HTTP tunnelling to work, you should enable 
cookies when you deploy servers behind a load balancer. The load balancer checks the cookie and sends requests with 
this cookie to the same server. Keep in mind that the cookie adds to the HTTP header size and increases the bandwidth 
overhead.

Note: 

For tunnelling connections, cookies are currently supported only on Flash Player 9.0.28 or later, in Windows only.

Example

 

<SetCookie>false</SetCookie>

See also

NodeID

SSL

Container element.

The elements in this section configure the incoming connections via the Secure Sockets Layer protocol, known as SSL. 
The 

SSL

 elements in Adaptor.xml configure the server to act as an SSL-enabled server to accept incoming SSL 

connections.

You need to acquire a digital certificate to use SSL. Once you get your SSL certificate through a certificate authority, 
such as Verisign, or by creating it yourself with a product such as OpenSSL, you then use the SSL elements to configure 
the server for SSL. 

The following is a quick start to allowing SSL-enabled connections to the server:

•

 to the 

SSL

 section of the Adaptor.xml file.

•

Specify the location of the certificate in the 

SSLCertificateFile

 element.

•

Specify where to find the associated private key file in the 

SSLCertificateKeyFile

 element.

•

If the private key file is encrypted, specify the passphrase to use for decrypting the private key file in the 

SSLPassPhrase

 element.

Summary of Contents for 65029121 - Flash Media Streaming Server


































































































































































































































































Reviews:

No comments