manualshive.com logo in svg

Adobe 65029121 - Flash Media Streaming Server, Configuration And Administration Manual, Page: 129 / 257

Share
Download
Adobe 65029121 - Flash Media Streaming Server Configuration And Administration Manual Download Page 129

125

FLASH

 MEDIA

 SERVER

 4.5

 CONFIGURATION

 AND

 ADMINISTRATION

XML configuration files reference

Last updated 11/28/2012

Allow

A comma-delimited list of host names, domain names, and/or full or partial IP addresses from which clients can 
connect to the server.

Example

 

<Allow>foo.yourcompany.com, adobe.com, 10.60.1.133, 10.60</Allow>

See also

Deny

, 

Order

Deny

A comma-delimited list of host names, domain names, and/or full or partial IP addresses from which clients cannot 
connect to the server.

Example

 

<Deny>foo.yourcompany.com, adobe.com, 10.60.1.133, 10.60</Deny>

See also

Allow

, 

Order

Edge

Container element.

Contains elements that specify an edge to configure for HTTP tunnelling. Edges are defined in 

HostPort

 elements in 

the 

HostPortList

 container. Each edge can have different HTTPTunnel configurations.

Attribute

name

 

A name identifying an edge. Use the name specified in the 

HostPort

 element. 

Contained elements

Enable

, 

IdlePostInterval

, 

IdleAckInterval

, 

MimeType

, 

WriteBufferSize

, 

SetCookie

, 

Redirect

, 

NeedClose

, 

Enable

Specifies whether or not to allow HTTP tunnelling connections.

These are the possible values for the 

Enable

 element:

Important: 

Only one application can use a port at a time. For example, if you configure Flash Media Server to use port 

80 for HTTP tunnelling, the web server cannot use port 80.

Value

Description

true

Allow all HTTP tunnelling connections. This is the default value.

false

Disallow all HTTP tunnelling connections.

http1.1only

Allow only HTTP 1.1 tunnelling connections.

keepalive

Allow HTTP 1.1 or HTTP 1.0 keepalive connections.

Summary of Contents for 65029121 - Flash Media Streaming Server


































































































































































































































































Reviews:

No comments