manualshive.com logo in svg

Adobe 65029121 - Flash Media Streaming Server, Configuration And Administration Manual, Page: 127 / 257

Share
Download
Adobe 65029121 - Flash Media Streaming Server Configuration And Administration Manual Download Page 127

123

Last updated 11/28/2012

Chapter 7: XML configuration files 
reference

Edit the configuration files in the 

RootInstall

/conf directory to configure the server. 

Important: 

Do not modify certain XML elements without contacting Adobe Support. These elements are marked with 

an Important note.

More Help topics 

“

Edit a configuration file

” on page  17

Changes to configuration files from 4.0 to 4.5

When upgrading from version 4.0 to version 4.5 of Flash Media Server, be aware of changes to the XML configuration 
files.

fms.ini changes

The Flash Media Server 4.5 fms.ini file does not store the Administrator password. The following parameter has been 
removed from the 4.5 fms.ini file:

> # Password for server admin  
> # For example:  
> #    SERVER.ADMIN_PASSWORD = bar  
> #  
> SERVER.ADMIN_PASSWORD = adminadmin

The password is stored in the Users.xml file as a salted hash. To reset the password, see “

Delete administrator accounts 

and reset passwords

” on page  90.

Adaptor.xml file changes

The default value of 

MaxHeaderLineLength

 is now 8192.

There are two new elements: 

Adaptor/SSL/

SSLVerifyClient

 and 

Adaptor/SSL/

SSLVerifyDepth

.

Application.xml file changes

The 

“

PeerLookupEvents

” on page  169 element is new. Use this element to determine how peer lookup events are 

dispatched.

The element 

/StreamManager/

EventsDir

 specifies the physical location where Event information for live streaming 

is stored. 

The 

RTMFP

 section provides the means to control the behavior of application-specific RTMFP functionality. It includes 

the following elements: 

PeerLookupEvents

, 

GroupControl

, and 

JoinLeaveEvents

. The 

HDS

 section provides the 

means to control the behavior of application-specific HTTP dynamic streaming functionality. It includes the following 
elements: 

Recording

 and 

ContentProtection

. 

Summary of Contents for 65029121 - Flash Media Streaming Server


































































































































































































































































Reviews:

No comments