manualshive.com logo in svg

Adobe 65029121 - Flash Media Streaming Server, Configuration And Administration Manual, Page: 12 / 257

Share
Download
Adobe 65029121 - Flash Media Streaming Server Configuration And Administration Manual Download Page 12

8

FLASH

 MEDIA

 SERVER

 4.5

 CONFIGURATION

 AND

 ADMINISTRATION

Deploying the server

Last updated 11/28/2012

Load balancing peer-assisted networking applications

Use one of the following two techniques to load balance a peer-assisted networking applications:

•

Distribute introductions across a server-only RTMFP NetGroup.

This technique is new in Flash Media Server 4.5. Use a Server-Side ActionScript API to distribute peer lookup 
requests across multiple servers. For more information, see 

Distributing introductions across multiple servers

.

•

Set up an edge-origin configuration. 

 In the Vhost.xml configuration file on each edge server, set 

<Mode>remote</Mode>

. For more information, see 

“

Configure edge servers

” on page  9.

On the client, the NetConnection URL changes from 

"rtmfp://fms-server/application"

 to 

"rtmfp://edge-

fms-server/?rtmfp://origin-fms-server/application"

. Alternately, you can configure the 

RouteTable

 

and 

RouteEntry

 in the Vhost.xml file on the edge server to point to the origin server. In this case, the client URL 

is still 

"rtmfp://fms-server/application"

. 

Set up DNS entries to distribute the load across the edge servers. For the server to function properly as an RTMFP 
introducer, use one origin server per application. For peer lookup to work, clients must be connected to the same 
server process, but not necessarily to the same application. Peer lookups do not work across origin servers. 
However, peerIDs are cached on the edge server which reduces the load on the origin. When clients are connected 
to the same edge, the introduction can happen at the edge and there is not a lookup call to the origin. 

More Help topics 

“

Deploying edge servers

” on page  8

Deploying edge servers

Workflow for deploying edge servers

Note: 

Flash Media Streaming Server cannot be configured as an edge server.

By default, the server runs as an origin server. To run the server as an edge server, you must configure an XML file. 
Typically you would run Flash Media Interactive Server as an origin server on one computer and run Flash Media 
Interactive Server as an edge server on another computer.

1.

 

 Install Flash Media Interactive Server and verify the installation on each computer.

Deploy all edge and origin servers on computers that meet the minimum system requirements. For information about 
installing and verifying installation, see the 

Installation Guide

.

Note: 

For cross-platform compatibility, use lowercase names for all folders and applications. 

2.

 

 Configure an edge server and restart. 

On the edge server, edit the Vhost.xml file of the virtual host you want to run as an edge server. 

3.

 

 Verify that the edge server can communicate with the origin server.

The easiest way to verify is to create an explicit connection. Create a SWF file with an explicit connection to the edge 
server and run the vod or live service. 

Summary of Contents for 65029121 - Flash Media Streaming Server


































































































































































































































































Reviews:

No comments