ADLINK Technology VPX3001 Series, Manual

Page: 55 / 101

BIOS Setup 45
VPX3001
8 BIOS Setup
The following chapter describes basic navigation for the
AMIBIOS®8 BIOS setup utility.
8.1 Starting the BIOS
To enter the setup screen, follow these steps:
1. Power on the motherboard
2. Press the < Delete > key on your keyboard when you see
the ADLINK Logo (Quiet Boot enabled) or the text prompt:
< Press DEL to run Setup > (Quiet Boot disabled).
3. After you press the < Delete > key, the main BIOS setup
menu displays. You can access the other setup screens
from the main BIOS setup menu, such as Chipset and
Power menus.
Note:
In most cases, the < Delete > key is used to invoke the setup
screen. There are several cases that use other keys, such as
< F1 >, < F2 >, and so on.