USB-7230/7250
Quick
Start
Guide Rev.
2.00
USB-7230/7250
USB 2.0-based Digital I/O Module
Getting Started
Package Contents
Your package should contain:
• Rail mount kit
• ADLINK All-in-One CD
• Quick Start Guide
(this document)
• USB-7230/7250
• Stand
• USB cable (2m)
• 2X 20-pin removable
screw terminals
P/N
50-41039-5000
Nov.
11,
2016
Features
Installing the Driver
Connecting the USB-7230/7250
1. Connect the USB-7230/7250 module to one USB 2.0 or 3.0 port on the
computer using the included USB cable
2. The first time the USB-7230/7250 module is connected, a New Hardware
message appears. It will take around 6 seconds to load the firmware.
When complete, the LED indicator on the rear of the USB DAQ module
changes from amber to green and the New Hardware message closes.
The USB-7230/7250 module can now be located in the hardware
Device Manager, as shown.
• USB 2.0, USB bus powered
• Programmable digital filter
clears input channels
• Programmable DO/Relay initial
status
• Up to 2500 VRMS isolation
voltage
• Removable screw terminals
• Lockable USB cable for secure
connectivity
• Ready-to-use testing application
(U-Test) included
1. Download the latest UD-DASK driver & U-Test from:
http://www.adlinktech.com/ and run.
2. Follow the installation instructions
Check product package
Install USB-7230/7250
driver (UD-DASK)
& utility (U-Test)
Connect USB-7230/7250
to USB 2.0/3.0 port
Perform quick test with
U-Test utility
