41
SETO-1000
4.5 Server Mgmt Setup
You can use this screen to specify options for the Server Management settings. Use the up and
down <Arrow> keys to select an item. Use <+> and <-> keys to change the value of the selected
option. The settings are described in the following pages. The screen is shown as below.
IOH Configuration
Select the Intel(R) VT for Directed I/O Configuration. Options: Enabled/Disabled.
Wait for BMC
It is for enabling or disabling the interface to communicate with BMC.
Post Watchdog Timer
It is for enabling or disabling Post timer.
Post Watchdog Timer timeout
It can select the value between 20 to 55 sec for Post timer expiration value.
Post Watchdog Timer policy
Configure how the system should respond if the Post Watchdog Timer expires. Not available
if Timer is disable.
OS Watchdog Timer
If enabled, starts a BIOS timer which can only be shut off by Intel Management software after
the OS loads.
OS WD Timer Timeout
If is for configuring the length of the OS boot watchdog timer. Not available if OS boot
watchdog timer is disabled.
OS Watchdog Timer policy
Configure how the system should respond if the OS Watchdog Timer expires. Not available if
Timer is disable.
