33
SETO-1000
4.3.5 USB Configuration
You can use this screen to select options for the USB Configuration Settings. Use the up and down <
Arrow > keys to select an item. Use the < + > and < - > keys to change the value of the selected
option. A description of the selected item appears on the right side of the screen. The settings are
described on the following pages. An example of the
USB Configuration
screen is shown below.
Legacy USB Support
Enables legacy USB support. Auto option disables legacy support if no USB devices are
connected. The disable option will keep USB devices available only for EFI applications.
Set this value to
Enabled/Disabled/Auto.
4.3.6 NCT5104D Super IO Configuration
You can use this screen to select options for the Super IO settings. Use the up and down < Arrow >
keys to select an item. Use the < + > and < - > keys to change the value of the selected option. The
settings are described on the following pages. The screen is shown below.
