31
SETO-1000
Active Processor Core
Number of cores to enable in each processor package.
Set this value to
All, 1, 2, 3.
Intel Virtualization Technology
When enabled, a VMM can utilize the additional hardware capability provided by
Vanderpool Technology. Set this value to
Enabled/Disabled.
PPIN Support
Enable/Disable Protected Processor Inventory Number (PPIN).
CPU Power Management Configuration
EIST
Conventional Intel SpeedStep Technology switches both voltage and frequency in tandem
between high and low levels in response to processor load. Options available:
Enabled/Disabled. Default setting is Enabled.
P-STATE Coordination
In HW_ALL mode, the processor hardware is responsible for coordinating the P-state
among logical processors dependencies. The OS is responsible for keeping the P-state
request up to date on all logical processors.
In SW_ALL mode, the OS Power Manager is responsible for coordinating the P-state
among logical processors with dependencies and must initiate the transition on all of those
Logical Processors
CPU C3/C6 Report
Allows you to determine whether to let the CPU enter C3/C6 mode in system halt state.
When enabled, the CPU core frequency and voltage will be reduced during system halt
state to decrease power consumption. The C3/C6 state is a more enhanced power-saving
state than C1. Auto lets the BIOS automatically configure this setting.
Options available for CPU C3 Report: ACPI C2/ACPI C3/Disabled. Default setting is ACPI
C2.
Options available for CPU C6 Report: Enabled/Disabled. Default setting is Enabled.
