Getting Started
17
PXIe-3988
2
Getting Started
This chapter describes procedures for installing the PXIe-3988
and making preparations for its operation, including hardware and
software setup. Note that the PXIe controller is shipped with RAM
and an SSD preinstalled. Contact ADLINK or an authorized dealer
if there are any problems during the installation.
2.1
Package Contents
Before beginning, check the package contents for any damage
and ensure that the following items are included:
PXIe-3988 Controller (equipped with RAM and HDD or
SSD)
PXIe-3988-3987-3977-3937 Quick Start Guide
If any of these items are missing or damaged, contact the dealer
from whom you purchased the product. Save the shipping materi-
als and carton in case you want to ship or store the product in the
future.
NOTE:
NOTE:
Diagrams and illustrated equipment are for reference only.
Actual system configuration and specifications may vary.
WARNING:
Do not install or apply power to equipment that is damaged or
missing components. Retain the shipping carton and packing
materials for inspection. Contact an ADLINK dealer/vendor
immediately for assistance and obtain authorization before
returning any product.
Summary of Contents for PXIe-3988
