manualshive.com logo in svg

ADLINK Technology PXI-2020, User Manual, Page: 23 / 60

Share
Download
ADLINK Technology PXI-2020 User Manual Download Page 23

Getting Started

 15

2.5

Software Support

ADLINK provides comprehensive software drivers and packages
to suit various user approaches to building a system. Aside from
programming libraries, such as DLLs, for most Windows-based
systems, ADLINK also provides drivers for other application envi-
ronment such as LabVIEW® and MATLAB®. ADLINK also pro-
vides ActiveX component ware for measurement and SCADA/
HMI, and breakthrough proprietary software applications. All soft-
ware options are included in the ADLINK All-in-One DVD.

Programming Library

For customers who are writing their own programs, we provide
function libraries for many different operating systems, including:

D2K-DASK: 

Include device drivers and DLL for Windows 98/NT/2000/XP/Vista/
7. DLL is binary compatible across Windows 98/NT/2000/XP/
Vista/7. This means all applications developed with D2K-DASK
are compatible across Windows 98/NT/2000/XP/Vista/7. The
developing environment can be VB, VC++, Delphi, BCB6, or any
Windows programming language that allows calls to a DLL. The
user’s guide and function reference manual of D2K-DASK are in
the CD. 

Summary of Contents for PXI-2020





























































Reviews:

No comments