manualshive.com logo in svg

ADLINK Technology PCIe-FIW Series, User Manual, Page: 38 / 53

Share
Download
ADLINK Technology PCIe-FIW Series User Manual Download Page 38

Function Library 

 29

4

Function Library

4.1

Function List

Function Name

Description

System Functions

FIW64_Initialize

Loads the FIW64 driver. This function must be 
called before any other functions.

FIW64_GetTotalDeviceNum

Obtain the number of the FIW64 cards in the 
system.

FIW64_GetTotalDeviceID

Obtain the CardIDs of the FIW64 cards in the 
system.

FIW64_ResetDevice

Resets the FIW64 card to the default status.

FIW64_GetFirmwareVersion

Obtain the firmware version of the FIW64 card.

FIW64_GetErrorMessage

Obtain the Error Message by returning the value 
of functions.

DIO Functions

FIW64_SetDO

Set the general purpose digital output status.

FIW64_GetDI

Obtain the general purpose digital input status.

Trigger Functions

FIW64_SetTriggerDelayTime Set the delay time of the output triggers.

FIW64_GetTriggerDelayTime Obtain the delay time of the output triggers.

FIW64_SetTriggerWidth

Set the width of the output triggers.

FIW64_GetTriggerWidth

Obtain the width of the output triggers.

FIW64_SetTriggerPolarity

Set the input and output polarity of the output 
triggers.

FIW64_GetTriggerPolarity

Obtain the input and output polarity of the output 
triggers.

Summary of Contents for PCIe-FIW Series






















































Reviews:

No comments