manualshive.com logo in svg

ADLINK Technology PCIe-8154, User Manual, Page: 87 / 162

Share
Download
ADLINK Technology PCIe-8154 User Manual Download Page 87

 75

PCIe-8154

@ Description

_8154_tv_move

:

This function is to accelerate an axis to the specified constant
velocity with a trapezoidal profile. The axis will continue to
travel at a constant velocity until the velocity is changed or the
axis is commanded to stop. The direction is determined by the
sign of the velocity parameter.

_8154_sv_move

:

This function is to accelerate an axis to the specified constant
velocity with a S-curve profile. The axis will continue to travel at
a constant velocity until the velocity is changed or the axis is
commanded to stop. The direction is determined by the sign of
velocity parameter.

_8154_emg_stop

:

This function is used to immediately stop an axis. This function
is also useful when a preset move (both trapezoidal and S-
curve motion), manual move, or home return function is per-
formed.

_8154_sd_stop

:

This function is used to decelerate an axis to stop with a trape-
zoidal or S-curve profile. This function is also useful when a
preset move (both trapezoidal and S-curve motion), manual
move, or home return function is performed. Note: The velocity
profile is decided by original motion profile.

_8154_get_current_speed

:

This function is used to read the current pulse output rate
(pulse/sec) of a specified axis. It is applicable in any time in any
operating mode.

@ Syntax

C/C++(Windows XP/7/8.1)

I16 _8154_tv_move(I16 AxisNo, F64 StrVel, F64 

MaxVel, F64 Tacc);

I16 _8154_sv_move(I16 AxisNo, F64 StrVel, F64 

MaxVel, F64 Tacc, F64 SVacc);

Summary of Contents for PCIe-8154



































































































































































Reviews:

No comments