ADLINK Technology NEON-2000-JT2-X Series User Manual Download Page 47

Page: 47 / 53

Software Upgrade

NEON-2000-JT2-X

4.1.2

System Flashing Procedure

This section illustrates how to flash the NEON-2000-JT2-X OS
image. Ensure that you have obtained the correct image file from
ADLINK and have saved it to the host PC before performing the
following procedure.

1. Connect the M12 17-pin connector (male) on the system

flash cable to the DI/O input on the bottom side of the
NEON-2000-JT2-X.

2. Power on the NEON-2000-JT2-X and wait for the status

LED to solid light orange (not flashing).

3. Connect the NEON-2000-JT2-X to the host PC using the

system flash cable.

4. Enter Recovery Mode using the system flash cable.

5. Press and hold the black button for at least three sec-

onds.

6. With the black button depressed, press the red button,

and then release the black button.

7. Execute the

Isusb

command on the host PC.

If "NVIDIA Corp." appears on the list, then the NEON-
2000-JT2-X has successfully entered Recovery Mode.

Summary of Contents for NEON-2000-JT2-X Series






















































Search results

Summary of Contents for NEON-2000-JT2-X Series

Reviews:

Related manuals for NEON-2000-JT2-X Series

Brands by name

Popular brands

ADLINK Technology NEON-2000-JT2-X Series, User Manual

Search results

Summary of Contents for NEON-2000-JT2-X Series

Reviews:

Related manuals for NEON-2000-JT2-X Series

Brands by name

Popular brands