ADLINK Technology nanoX-AL, User Manual

Page: 34 / 97

26
Module Interfaces
4.2. 40-pin Debug Connector
FPC Connector Type:
FCI 59GF Flex 10042867
Pin Orientation
1 40
40-pin Debug Connector Pin Definition on the COM Express Module
Pin # Interface Siganls Remark
1 NC RSVD
2 SMC_STATUS Connect to LED
3 BIOS_MODE Connect to Jumper for Debug
4 SEL_BIOS Connect to Jumper for Debug
5
For SMC Debug
POSTWDT_DIS# Connect to Jumper for Debug
6 SUS_S5#
7 SUS_S4#
8 SUS_S3#
9 CB_PWROK
10 CB_RESET#
11 SYS_RESET#
12
Test Point
PWRBTN#
13 SMC_OCD0B
Include a jumper to connect OCD0B via 1Kohm
pull-down to GND
14 SMC_OCD0A
Include a jumper to connect OCD0A via 1Kohm
pull-up to 3.3V_SMC
15 SMC_CLK
16 SMC_DATA
17 SMC_RESET_IN#
18 SMC_FLMD0
19 SMC_RXD6
20 SMC_TXD6
21 GND3
22 3V3_A 3.3VSB provided from COM module
23
SMC Program
interface
3V3_SMC1 3.3VSB provided from COM module