manualshive.com logo in svg

ADLINK Technology MXC-6401D, User Manual

Share
Download
ADLINK Technology MXC-6401D User Manual Download Page 38

PRELIMINARY

24

Introduction

Display Options

With computing and graphic performance enhancement by its 3rd
generation Intel® processor, the MXC-6400 controller can support
three independent displays, with configuration as follows.

Table  1-11: Maximum Available Resolutions with 3-Display Configuration

1.5.11

Audio Jacks

The MXC-6400 implements Intel® High Definition audio on a
Realtek ALC262 chip. The HD audio supports up to 24-bit, 192
KHz sample rate high quality headphone/lineout and microphone
input. Audio jack access is on the front panel. The pink jack pro-
vides microphone input, and the green jack lineout.

Table  1-12: Audio Jack Signals

DisplayPort1

DisplayPort2

Other Ports

DisplayPort
4096x2304@60Hz

DisplayPort
4096x2304@60Hz

DVI
4096x2160@60hz

DisplayPort
4096x2304@60Hz

DisplayPort
4096x2304@60Hz

VGA
1920x1200@60Hz

Color

Signal

Green

lineout

Pink

Mic In

Summary of Contents for MXC-6401D





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands