ADLINK Technology MVP-5000 Series, User Manual, Page: 32 / 88

18 Introduction
1.5.10 USB 3.0 Ports
The MVP-5000 provides four USB 3.0 ports supporting Type A
USB3.0 connection on the front panel. All USB3.0 ports are com-
patible with super-speed, high-speed, full-speed and low-speed
USB devices.
1.5.11 DC Power Connector
The DC power supply connector of the MVP-5000 is on the front
panel. The power supply connector consists of three pins, V+,
chassis ground, and V- from right to left respectively. V+ and V-
pins provide DC power input and the chassis ground pin allows
connection of the chassis to ground for better EMC compatibility.
The DC power input for the MVP-5000 allows a voltage input
range from 12VDC to 24VDC.
Figure 1-15: DC Power Connector
Table 1-11: DC Power Supply Connector Signals
WARNING:
Ensure that the DC power supply:

is within the input voltage range defined in the
specification

is stable and low-noise DC

provides sufficient operating current
DC power supply over or under voltage, unstable, or of insuffi-
cient power may cause system instability and physical damage
Pin Signal
1 V+ (DC_IN)
2 GND (CHGND)
3 V- (DGND)