ADLINK Technology miniBASE-10R, User Manual

Page: 23 / 44

miniBASE-10R
Connectors, Pinouts and Jumpers
17
6.6. LVDS Jumper Settings
6.6.1. JP5: Panel Power Voltage
Selects the LVDS Panel Power voltage on JX8
6.6.2. JP6: Backlight Power Voltage
Selects the Backlight Panel Power voltage on JX8
6.6.3. JP3: Brightness Control
Sets the Panel Brightness Control to Voltage
Level Or PWM. When set to Voltage Level, the
Backlight CTRL signal can be varied from 0-5V
in 0.5V increments
6.6.4. JP7: Brightness PWM Source
Sets the Panel Brightness PWM Source to GPU
or LVDS I2C. When Brightness PWM Source is
set to LVDS I2C, the user will be able to use the
SEMA command to control the PWM pulse to the
panel backlight
Note: <<<< indicates default setting
Jumper Status
1-2 + 3.3V <<<<
2-3 + 5.0V
Jumper Status
1-2 + 3.3V
2-3 + 5.0V <<<<
Jumper Status
1-2 Voltage Level
2-3 PWM <<<<
Jumper Status
1-2 GPU <<<<
2-3 LVDS I2C