ADLINK Technology MECS-6110, User Manual

Page: 35 / 93

35
MECS-6110
3.11 BMC eth0 Default and Static IP Settings
The default IP setting is DHCP. Users can login to the BMC to modify the IP.
Static IP Settings:
Show the current LAN setting
•
ipmitool lan print 1
Set the IP source to static
•
ipmitool lan set 1 ipsrc static
Set the IP address
•
ipmitool lan set 1 ipaddr xxx.xxx.xxx.xxx
Set the netmask address
•
ipmitool lan set 1 netmask xxx.xxx.xxx.xxx
Set the gateway address
•
ipmitool lan set 1 defgw ipaddr xxx.xxx.xxx.xxx
Restore Default:
Set IP source to DHCP
•
ipmitool lan set 1 ipsrc dhcp
Note
: BMC IP can be set in the BIOS. Refer to “5.8.3 Sub-Menu: BMC Network
Configuration”.