ADLINK Technology MCM-204, User Manual

Page: 25 / 55

Getting Started 17
MCM-204
2 Getting Started
2.1 Unpacking the MCM-204
Ensure that the following items are included in the package. If any
items are missing, contact your sales representative for assistance.
 MCM-204
 DIN rail mount kit with 2x flat head screws
 Temperature sensor with 3 meter cable
 Quick Start Guide
 Optional accessories (if applicable):
 Wall mount kit with 4x pan head screws
 40W AC-DC adapter
2.2 Connecting to I/O
1 For analog input, plug in the accelerometer with a BNC
type connector.
2. For digital input or output, insert the signal wires into the
terminal block.
3. Use a CAT 5 type Ethernet cable to connect a host PC to
one of the Ethernet ports on the top panel. To create a
daisy chain of multiple MCM-204 devices, use the sec-
ond Ethernet port to cascade them together. Cascading
reduces the number of ports needed to connect devices.
WARNING:
Before unpacking, check the shipping carton for any damage.
If the shipping carton and/or contents are damaged, inform
your dealer immediately. Retain the shipping carton and pack-
ing materials for inspection. Obtain authorization from your
dealer before returning any product to ADLINK.
CAUTION:
If connecting MCM-204 devices in a daisy chain, only use a
sequence configuration: do
not use a ring configuration. A ring
configuration will cause network communications to fail.